1508 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure pim cbsr
configure pim cbsr [vlan <vlan name> {<priority [0-254]> | none]
Description
Configures a candidate bootstrap router for PIM sparse-mode operation.
Syntax Description
Default
The default setting for priority is 0, and indicates the lowest priority.
Usage Guidelines
The VLAN specified for CBSR must have IPMC forwarding enabled for PIM sparse mode.
Example
The following command configures a candidate bootstrap router on the VLAN accounting:
configure pim cbsr vlan accounting 30
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
priority Specifies a priority setting. The range is 0 - 254.
none Specifies to delete a CBSR.
To Next Page
Loading...
Need help?
General
