configure dns-client add name-server
ExtremeWare Software 7.3.0 Command Reference Guide 73
configure dns-client add name-server
configure dns-client add name-server <ipaddress>
Description
Adds a DNS name server to the available server list for the DNS client.
Syntax Description
Default
N/A.
Usage Guidelines
Up to three DNS name servers can be configured in ExtremeWare versions prior to 6.2.1. In
ExtremeWare 6.2.1 and later, eight DNS name servers can be configured.
Example
The following command specifies that the switch use the DNS server 10.1.2.1:
configure dns-client add name-server 10.1.2.1
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on all platforms.
ipaddress Specifies an IP address.
To Next Page
Loading...
Need help?
General
