Extreme Networks ExtremeWare - Show Slb Connections

580 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
show slb connections
show slb connections [ipaddress <ip address>: [ftp | http | https | imap4 |
ldap | nntp | pop3 | smtp | socks | telnet | tftp | web | wildcard | www |
<TCP or UDP port number>] | vip <vip name>]
Description
Displays information on current connections.
Syntax Description
Default
N/A.
Usage Guidelines
You can specify a client, virtual server, or node. If you do not specify a virtual server or IP address,
information on all connections is displayed. An IP address of 0.0.0.0:0 is a wildcard.
Example
The following command displays the current connection information for all connections:
show slb connections
History
This command was first available in ExtremeWare 6.1.
ip address Specifies an IP address.
vip name Specifies a virtual server.
ftp Specifies an FTP port.
http Specifies an HTTP port.
https Specifies an HTTPS port.
imap4 Specifies an IMAP4 port.
ldap Specifies an LDAP port.
nntp Specifies an NNTP port.
pop3 Specifies a POP3 port.
smtp Specifies an SMTP port.
socks Specifies a SOCKS port.
telnet Specifies a telnet port.
tftp Specifies a TFTP port.
web Specifies a Web port.
wildcard Specifies any port associated with a wildcard server.
www Specifies a www port
TCP or UDP port number Specifies a TCP or UDP port.