556 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
enable slb failover ping-check
enable slb failover ping-check
Description
Enables ping-check.
Syntax Description
This command has no arguments or variables.
Default
Ping-check is disabled by default.
Usage Guidelines
To disable ping-check, use the following command:
disable slb failover ping-check
Example
The following command enables ping-check:
enable slb failover ping-check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...