configure auth mgmt-access tacacs
ExtremeWare Software 7.3.0 Command Reference Guide 773
configure auth mgmt-access tacacs
configure auth mgmt-access tacacs primary <ipaddress> [secondary
<ipaddress>]
Description
Configures authentication of management sessions for TACACS servers.
Syntax Description
Default
N/A.
Usage Guidelines
The TACACS server must be configured before this command is used. The command will fail if the
given primary and secondary TACACS servers are not configured.
Example
configure auth mgmt-access tacacs primary 192.168.14.12 secondary 192.168.14.55
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP addresses of the primary or secondary servers.
To Next Page
Loading...