show igmp group
ExtremeWare Software 7.3.0 Command Reference Guide 1543
show igmp group
show igmp group {<ip address> {sender <ip address>}} {vlan <vlan name>}
Description
Lists the IGMP group membership for the specified VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
If no VLAN is specified all VLANs are displayed. You can also filter the display by group address and
by multicast stream sender address.
Example
The following command lists the IGMP group membership for the VLAN accounting:
show igmp group 10.0.0.1 sender 10.0.0.2 accounting
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
group <ip address> Specifies a group IP address.
sender <ip address> Specifies a sender’s IP address.
vlan name Specifies a VLAN name.
To Next Page
Loading...