configure eaps add protect vlan
ExtremeWare Software 7.3.0 Command Reference Guide 971
configure eaps add protect vlan
configure eaps <name> add protect vlan <vlan_name>
Description
Adds the specified protected VLAN to the specified EAPS domain.
Syntax Description
Default
N/A.
Usage Guidelines
You must configure one or more protected VLANs for each EAPS domain. The protected VLANs are the
data-carrying VLANs.
When you configure the VLAN that will act as a protected VLAN, the ring ports of the protected VLAN
must be tagged (except in the case of the default VLAN). As long as the ring is complete, the master
node blocks the protected VLANs on its secondary port.
Example
The following command adds the protected VLAN “orchid” to the EAPS domain “eaps_1”:
configure eaps eaps_1 add protect vlan orchid
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
name Specifies the name of an EAPS domain.
vlan_name Specifies the name of the protected VLAN.
To Next Page
Loading...
Need help?
General
