unconfigure transceiver-test threshold
ExtremeWare Software 7.3.0 Command Reference Guide 757
unconfigure transceiver-test threshold
unconfigure transceiver-test threshold
Description
Returns the transceiver test threshold to the factory default of 3 errors.
Syntax Description
The command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this feature when the switch can be brought off-line.
Extreme Networks does not recommend changing the default transceiver test period. The default is
adequate for most networks.
Example
The following command returns the transceiver test threshold to 3 errors:
unconfigure transceiver-test threshold
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on modular switches only.
To Next Page
Loading...