show wireless ports interface clients
ExtremeWare Software 7.3.0 Command Reference Guide 2079
show wireless ports interface clients
show wireless ports [<portlist> | all] interface [1 | 2] clients {detail}
Description
Displays the current wireless client state of a selected port or ports and interface.
Syntax Description
Default
N/A.
Usage Guidelines
Client current state information is available for all clients that have sent an authentication message to
the Altitude
300. Information in this table is timed out if no packets have been received from the client
by the configurable period of time set by the administrator.
The following fields of the client state table are displayed with this command:
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail (Optional) Specifies to display the information in detailed format.
Fields Description
Client MAC MAC address of the client adapter
Current State DETECTED, AUTHED, ASSOC, or FORWARD. Indicates which part
of the state machine the client is currently in.
Last state change The system time when the client last changed states
Encryption Type Type of MAC-level encryption the client is using. This is negotiated
during the association state machine, so is only valid if client state is
FORWARDING.
Authentication Type Last type of authentication the client tried. In the case of a client in
FORWARDING, indicates the type of authentication that granted
access to the network.
ESSID Extended service set identifier of the network
Wireless Port Wireless switch port serving the client
Client VLAN VLAN assigned to this client by a radius VSA or other mechanism.
This is only valid for clients in FORWARDING.
Client Priority Quality of service (QoS) level for the client
Tx Frames Number of frames transferred to the client
Rx Frames Number of frames returned by the client
Tx Bytes Number of bytes transferred to the client
Rx Bytes Number of bytes returned by the client
To Next Page
Loading...
Need help?
General
