EasyManua.ls Logo

Extreme Networks ExtremeWare - Configure Isis Area Delete Domain-Summary

Extreme Networks ExtremeWare
2254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1264 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure isis area delete domain-summary
configure isis area <isis area identifier> delete domain-summary
<ip address> /<netmask>
Description
Deletes a summary address to be applied on the IP reachability information from this level 1 area,
which will be included in the level 2 LSP.
Syntax Description
Default
N/A.
Usage Guidelines
When the summary address is deleted, the summarized IP reachability information must not be
included in the level 2 LSP
Example
The following command deletes one summary address 10.0.0.0/8 from the level 1 area a1:
configure isis area a1 delete domain-summary 10.0.0.0/8
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
isis area identifier Specifies an area identifier.
ip address Specifies an IP address.
netmask Specifies an IP mask

Table of Contents

Related product manuals