798 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure radius-accounting timeout
configure radius-accounting timeout <seconds>
Description
Configures the timeout interval for RADIUS-Accounting authentication requests.
Syntax Description
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS-Accounting authentication requests. When
the timeout has expired, another authentication attempt will be made. After three failed attempts to
authenticate, the alternate server will be used.
Example
This example configures the timeout interval for RADIUS-Accounting authentication to 10 seconds.
After 30 seconds (three attempts), the alternate RADIUS server will be used:
configure radius-accounting timeout 10
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
seconds Specifies the number of seconds for authentication requests. Range is 3 to
120 seconds
To Next Page
Loading...