1902 ExtremeWare Software 7.3.0 Command Reference Guide
Power Over Ethernet Commands
clear inline-power stats ports
clear inline-power stats ports <portlist>
Description
Clears the inline statistics for the selected port to zero.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to clear all the information displayed by the show inline-power stats ports <portlist>
command.
Example
The following command clears the inline statistics for ports 1-8 on slot 1:
clear inline-power stats ports 1:1-1:8
The following command displays cleared inline power configuration information for ports 1-8 in slot 1:
show inline-power stats ports 1:1-1:8
Following is sample output from this command:
Port State Class Absent InvSig Denied OverCurrent Short
1:1 searching ------ 0000 0
1:2 delivering class0 0000 0
1:3 searching ------ 0000 0
1:4 searching ------ 0000 0
1:5 searching ------ 1000 0
1:6 delivering class3 0000 0
1:7 searching ------ 0000 0
1:8 searching ------ 0000 0
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...