700 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
enable sflow ports
enable sflow ports <portlist>
Description
Enables sFlow statistical packet sampling on one or more ports.
Syntax Description
Default
Disabled.
Usage Guidelines
This command enables sFlow on a particular list of ports. You will also need to enable sFlow globally in
order to gather statistics and send the data to the collector. Traffic is sampled on enabled ports only.
Once sFlow is enabled globally, and on the ports of interest, sampling and polling will begin.
Use the following command to enable sFlow globally:
enable sflow
Example
The following command enables sFlow sampling on the port 3:1:
enable sflow portlist 3:1
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
portlist Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5,
2:6-2:8.
To Next Page
Loading...