154 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 engine-boots
configure snmpv3 engine-boots <(1-2147483647)>
Description
Configures the SNMPv3 Engine Boots value.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command if the Engine Boots value needs to be explicitly configured. Engine Boots and Engine
Time will be reset to zero if the Engine ID is changed. Engine Boots can be set to any desired value but
will latch on its maximum, 2147483647.
Example
The following command configures Engine Boots to 4096:
configure snmpv3 engine-boots 4096
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
(1-2147483647) Specifies the value of engine boots.
To Next Page
Loading...
Need help?
General
