clear slot
ExtremeWare Software 7.3.0 Command Reference Guide 221
clear slot
clear slot <slot>
Description
Clears a slot of a previously assigned module type.
Syntax Description
Default
N/A.
Usage Guidelines
All configuration information related to the slot and the ports on the module is erased. If a module is
present when you issue this command, the module is reset to default settings.
If a slot is configured for one type of module, and a different type of module is inserted, the inserted
module is put into a mismatch state (where the inserted module does not match the configured slot),
and is not brought online. To use the new module type in a slot, the slot configuration must be cleared
or configured for the new module type. Use the
configure slot
command to configure the slot.
For version 6.0 and later:
• This command is available on modular switches.
For version 4.0:
• This command is available on BlackDiamond switches only.
Example
The following command clears slot 2 of a previously assigned module type:
clear slot 2
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on modular switches only.
slot Specifies a modular switch slot number.
To Next Page
Loading...