Extreme Networks ExtremeWare - Show Enhanced-Dos-Protect

show enhanced-dos-protect
ExtremeWare Software 7.3.0 Command Reference Guide 927
show enhanced-dos-protect
show enhanced-dos-protect [rate-limit | ipfdb] ports [<portlist> | all]
Description
Displays the status of the enhanced denial of service protection feature.
Syntax Description
Default
N/A.
Usage Guidelines
The output from this command displays status of the following enhanced denial of service protection
conditions:
• Enabled/Disabled
• Max. entries
• Current entries
• List of trusted/untrusted ports
• Rate limiting configuration
• Packet filtering statistics
Example
The following command shows global enhanced denial of service protection rate limit information:
show enhanced-dos-protect rate-limit
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
rate-limit Displays rate limiting configuration.
ipfdb Displays IPFDB learning qualifier configuration.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots a nd ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.