Extreme Networks ExtremeWare User Manual

configure mpls vpls delete peer
ExtremeWare Software 7.3.0 Command Reference Guide 1821
configure mpls vpls delete peer
config mpls vpls <vpls_name> delete peer [<ipaddress> {vcid <vcid>} |
<host_name> {vcid <vcid>} | all]
Description
Deletes a VPLS peer from the specified vpls_name.
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes a VPLS peer from the specified vpls_name. When the VPLS peer is deleted, VPN
connectivity to the VPLS peer is terminated. The optional
vcid keyword may be specified to fully
qualify a specific core-to-spoke Martini VC-LSP. The all keyword may be used to indicate that all VPLS
peers be deleted.
Example
Need example
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Identifies the VPLS within the switch (character string)
ipaddress Specifies the IP address for the peer node that is the endpoint of the VC-LSP
host_name Specifices the peer host name.
vcid Qualifies a specific core-to-spoke Martini VC-LSP.
all Deletes all VPLS peers.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English