disable iparp refresh
ExtremeWare Software 7.3.0 Command Reference Guide 1197
disable iparp refresh
disable iparp refresh
Description
Disables IP ARP to refresh its IP ARP entries before timing out.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
IP ARP refresh can only be disabled if IP forwarding is disabled. The purpose of disabling ARP refresh
is to reduce ARP traffic in a high node count layer 2 switching only environment.
Example
The following command disables IP ARP refresh:
disable iparp refresh
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
