Extreme Networks ExtremeWare User Manual

174 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
enable dhcp ports vlan
enable dhcp ports <portlist> vlan <vlan name>
Description
Enables DHCP on a specified port in a VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command enables DHCP for port 9 in VLAN corp:
enable dhcp ports 9 vlan corp
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
portlist Specifies the ports for which DHCP should be enabled.
vlan_name Specifies the VLAN on whose ports DHCP should be enabled.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English