Extreme Networks ExtremeWare - Configure Flow-Redirect Service-Check Nntp

configure flow-redirect service-check nntp
ExtremeWare Software 7.3.0 Command Reference Guide 445
configure flow-redirect service-check nntp
configure flow-redirect <flow redirect> service-check nntp <newsgroup>
Description
Configures the flow redirect NNTP check.
Syntax Description
Default
N/A.
Usage Guidelines
This command automatically enables NNTP check. The NNTP check checks the news server specified in
the flow redirect policy.
For ExtremeWare 6.2.0 and prior, the frequency of the NNTP check is 60 seconds, the timeout of the
NNTP check is 180 seconds, and you cannot configure these times.
For ExtremeWare 6.2.1 and later, configure the frequency and timeout using the following command:
configure flow-redirect timer service-check
Example
The following command configures (and enables) NNTP check for the flow redirect policy named
“nttp_flow” and checks the newsgroup “testgroup”:
configure flow-redirect nttp_flow service-check nntp testgroup
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
flow redirect Specifies a flow redirect policy.
newsgroup Specifies the news group to be checked.