configure route-map delete
ExtremeWare Software 7.3.0 Command Reference Guide 807
configure route-map delete
configure route-map <route_map> delete <seq_number>
Description
Deletes an entry from the route map.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command removes the entry with sequence number 20 from the route-map named
bgp-out:
configure route-map bgp-out delete 20
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
route-map The name of the route map to which this entry should be added.
seq-number Specifies a sequence number that uniquely identifies the entry, and
determines the position of the entry in the route map.
To Next Page
Loading...