452 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure flow-redirect timer tcp-port-check
configure flow-redirect timer tcp-port-check frequency <seconds> timeout
<seconds>
Description
Configures the flow redirect TCP port check frequency and timeout.
Syntax Description
Default
The default frequency is 10 seconds.
The default timeout is 30 seconds.
Usage Guidelines
The frequency must be less than the timeout.
Example
The following command configures a flow redirect tcp-port-check frequency of 15 seconds and a
timeout of 45 seconds:
configure flow-redirect timer tcp-port-check frequency 15 timeout 45
History
This command was first available in ExtremeWare 6.2.1.
Platform Availability
This command is available on all platforms.
frequency Specifies the tcp-port-check frequency. The range is 5 to 120.
timeout Specifies the tcp-port-check timeout. The range is 5 to 300.
To Next Page
Loading...
Need help?
General
