configure snmpv3 delete filter
ExtremeWare Software 7.3.0 Command Reference Guide 145
configure snmpv3 delete filter
configure snmpv3 delete filter [all | [{hex} <profile name> {subtree
<object identifier>}]]
Description
Delete a filter from a filter profile.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete a filter entry from the snmpNotifyFilterTable. Specify
all
to remove all
entries. Specify a profile name to delete all entries for that profile name. Specify a profile name and a
subtree to delete just those entries for that filter profile and subtree.
Example
Use the following command to delete the filters from the filter profile prof1 that reference the MIB
subtree 1.3.6.1.4.1:
configure snmpv3 delete filter prof1 subtree 1.3.6.1.4.1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
all Specifies all filters.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
profile name Specifies the filter profile of the filter to delete.
object identifier Specifies the MIB subtree of the filter to delete.
To Next Page
Loading...
Need help?
General
