disable netlogin session-refresh
ExtremeWare Software 7.3.0 Command Reference Guide 879
disable netlogin session-refresh
disable netlogin session-refresh
Description
Disables Network Login session refresh.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Network Login sessions can refresh themselves after a configured timeout. After the user has been
logged in successfully, a logout window opens which can be used to close the connection by clicking on
the LogOut link. Any abnormal closing of this window is detected on the switch and the user is logged
out after a time interval as configured for session refresh. The session refresh is enabled and set to five
minutes by default.
This command applies only to the web-based authentication mode of Network Login.
Example
The following command disables Network Login session refresh:
disable netlogin session-refresh
History
This command was first available in ExtremeWare 7.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...