disable slb vip
ExtremeWare Software 7.3.0 Command Reference Guide 545
disable slb vip
disable slb vip [all | <vip name> | ipaddress <ip address> : [ftp | http |
https | imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web |
wildcard | www | <TCP or UDP port number>]] {close-connections-now}
Description
Disables one or all virtual servers.
Syntax Description
Default
SLB is disabled by default.
Usage Guidelines
When disabled, no new connections are allowed to the real servers. If
close-connections-now
is
specified, all existing connections are immediately closed.
To enable a virtual server, use the following command:
enable slb vip
Example
The following command disables the virtual server “ftp_vip” and closes all open connections:
all Specifies all virtual servers.
vip name Specifies a virtual server.
ip address Specifies an IP address.
ftp Specifies an FTP virtual server.
http Specifies an HTTP virtual server.
https Specifies an HTTPS virtual server.
imap4 Specifies an IMAP4 virtual server.
ldap Specifies an LDAP virtual server.
nntp Specifies an NNTP virtual server.
pop3 Specifies a POP3 virtual server.
smtp Specifies an SMTP virtual server.
socks Specifies a SOCKS virtual server.
telnet Specifies a telnet virtual server.
tftp Specifies a TFTP virtual server.
web Specifies a Web virtual server.
wildcard Specifies any port associated with a wildcard server.
www Specifies a www virtual server
TCP or UDP port number Specifies a TCP or UDP port for the virtual server.
close-connections-now Immediately closes all open connections.
To Next Page
Loading...
Need help?
General
