Extreme Networks ExtremeWare User Manual

enable slb node ping-check
ExtremeWare Software 7.3.0 Command Reference Guide 567
enable slb node ping-check
enable slb node [all | <ip address>] ping-check
Description
Enables layer 3 ping-check.
Syntax Description
Default
Ping-check is enabled by default.
Usage Guidelines
Ping-check is automatically enabled when a node is added to a pool.
To disable ping-check on a node, use the following command:
disable slb node ping-check
Example
The following command enables all ping-checks:
enable slb node all ping-check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
all Specifies all nodes.
ip address Specifies the IP address of the node.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English