1824 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
enable mpls
enable mpls
Description
Enables MPLS on the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Disabling MPLS causes all LSPs to be released and all LDP neighbor sessions to be terminated.
Example
The following command globally enables MPLS on the switch:
enable mpls
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...