1312 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure ospf vlan neighbor add
configure ospf vlan <vlan name> neighbor add <ipaddress>
Description
Configures the IP address of a point-to-point neighbor.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
ipaddress Specifies an IP address.
To Next Page
Loading...