956 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
unconfigure enhanced-dos-protect ipfdb learn-window
unconfigure enhanced-dos-protect ipfdb learn-window ports <portlist>
Description
Resets the learning window on untrusted ports for the enhanced denial of service protection IPFDB
learning qualifier to default values for the selected ports.
Syntax Description
Default
The default learning window is 10 seconds.
Usage Guidelines
Use this command to reset the IPFDB learning window values for selected untrusted ports to the
default value of 10 seconds. To verify configuration, use the
show enhanced-dos-protect ipfdb
ports <portlist>
command.
Example
The following command resets the learning window on port 2 to the default value, 10 seconds:
unconfigure enhanced-dos-protect ipfdb learn-window ports 2
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...