Extreme Networks ExtremeWare User Manual

configure bgp peer-group nlri-filter
ExtremeWare Software 7.3.0 Command Reference Guide 1433
configure bgp peer-group nlri-filter
configure bgp peer-group <peer group> nlri-filter [in | out] [none |
<access profile>]
Description
Configures the NLRI filter for a peer group and all the neighbors of the peer group.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the NLRI filter for the peer group outer and its neighbors using the
access profile nosales:
configure bgp peer-group outer nlri-filter in nosales
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
peer group Specifies a peer group.
in Specifies to install the filter on the input side.
out Specifies to install the filter on the output side.
none Specifies to remove the filter.
access profile Specifies an access profile.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English