1436 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
configure bgp peer-group send-community
configure bgp peer-group <peer group> [send-community |
dont-send-community]
Description
Configures whether communities should be sent to neighbors as part of route updates.
Syntax Description
Default
N/A.
Usage Guidelines
These settings apply to the peer group and all neighbors of the peer group.
Example
The following command configures communities to be sent to neighbors as part of route updates:
configure bgp peer-group outer send-community
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
peer group Specifies a peer group.
send-community Specifies that communities are sent to neighbors as part of route updates.
dont-send-community Specifies that communities are not sent to neighbors as part of route updates.
To Next Page
Loading...