346 ExtremeWare Software 7.3.0 Command Reference Guide
VLAN Commands
show mac-vlan
show mac-vlan {configuration | database}
Description
Displays the MAC-based VLAN configuration and MAC address database content.
Syntax Description
Default
Shows both configuration and database information.
Usage Guidelines
Use the keyword
configuration
to display only the top section of this information. Use the database
keyword to display only the lower section.
Example
The following is an example of the
show mac-vlan
command:
Port Vlan Group State
11 MacVlanDiscover 10 Discover
12 MacVlanDiscover 10 Discover
16 MacVlanDiscover any Discover
17 MacVlanDiscover any Discover
Total Entries in Database:2
Mac Vlan Group
00:00:00:00:00:AA anntest1 any
any anntest1 10
2 matching entries
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
configuration Specifies display of the MAC-based VLAN configuration only.
database Specifies display of the MAC address database content only.
To Next Page
Loading...
Need help?
General
