show accounts pppuser
ExtremeWare Software 7.3.0 Command Reference Guide 1681
show accounts pppuser
show accounts pppuser
Description
Display the PPP user accounts database.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this command to examine the entries in the PPP user accounts database, used for authentication
when a link is initiated from a remote peer.
Example
The following command displays the PPP accounts database:
show accounts pppuser
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only. A similar command is available on the
Alpine switch.
To Next Page
Loading...
Need help?
General
