show igmp snooping filter
ExtremeWare Software 7.3.0 Command Reference Guide 1545
show igmp snooping filter
show igmp snooping {vlan <vlan name>} filter
Description
Displays IGMP snooping filters.
Syntax Description
Default
None.
Usage Guidelines
Use this command to display IGMP snooping filters configured on the specified VLAN. When no
VLAN is specified, all the filters will be displayed.
Example
To display the IGMP snooping filter configured on VLAN vlan101, use the following command:
show igmp snooping vlan101 filter
The output of the command will be similar to the following:
VLAN vlan101 (4094)
Filter Port
ap5 31 (-)
Total number of configured static filters = 1
Flags: (a) Active
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...