configure vlan slb-type
ExtremeWare Software 7.3.0 Command Reference Guide 517
configure vlan slb-type
configure vlan <vlan name> slb-type [both | client | none | server]
Description
Marks a VLAN as either a server VLAN or a client VLAN.
Syntax Description
Default
The default is
none
.
Usage Guidelines
Use the
both
option if a server originates or could possibly originate connections to other servers.
Example
The following command configures the VLAN “client_vlan” as a client VLAN:
configure vlan client_vlan slb-type client
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
both Configures the VLAN as both a server and a client VLAN.
client Configures the VLAN as a client VLAN.
none Disables SLB on the VLAN.
server Configures the VLAN as a server VLAN.
To Next Page
Loading...