unconfigure sonet ports
ExtremeWare Software 7.3.0 Command Reference Guide 1693
unconfigure sonet ports
unconfigure sonet ports <portlist>
Description
Resets the configuration parameters of the specified SONET port to their default values.
Syntax Description
Default
N/A.
Usage Guidelines
The following are the SONET port default values:
Example
The following command resets the configuration parameters for port 1, slot 8 of a BlackDiamond switch
to the default values:
unconfigure sonet ports 8:1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
portlist Specifies the port number(s).
clock setting internal
Framing sonet
signal label auto, where the value of the signal Label field is automatically set based on
standard conventions for the given payload type.
threshold signal degrade 10
-6
threshold signal fail 10
-5
trace path null
trace section 1 for SONET, null for SDH
To Next Page
Loading...
Need help?
General
