1088 ExtremeWare Software 7.3.0 Command Reference Guide
ESRP Commands
configure vlan esrp elrp-master-poll disable
configure vlan <vlan name> esrp elrp-master-poll disable
Description
Disables the use of ELRP by ESRP in the master state.
Syntax Description
Default
Disabled.
Usage Guidelines
Use this command to disable the use of ELRP by ESRP in the master state. When you disable ELRP, the
ESRP master switch no longer transmits ELRP PDUs to detect network loops.
Example
The following command disables the use of ELRP in the master state on the ESRP-enabled VLAN
elrp1
:
configure vlan elrp1 esrp elrp-master poll disable
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies an ESRP-enabled VLAN name.
To Next Page
Loading...