1586 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
enable ipxsap
enable ipxsap
Description
Enables IPX/SAP on the router.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command enables IPX/SAP on the router:
enable ipxsap
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
To Next Page
Loading...