configure security-profile dot1x-wpa pairwise-update-timer
ExtremeWare Software 7.3.0 Command Reference Guide 817
configure security-profile dot1x-wpa pairwise-update-timer
configure security-profile <name> dot1x-wpa pairwise-update-timer <minutes>
Description
When the network-authentication is set to dot1x, WPA, or WPA-PSK, this command configures the
interval when pairwise keys for dot1x and WPA clients are updated.
Syntax Description
Default
10 minutes.
Usage Guidelines
Use this command to change WPA and dot1x key update time values. Change timers only when you do
not want the keys to be updated frequently.
Example
The following example sets the interval for updating keys to 60 minutes:
configure security-profile open-profile dot1x-wpa pairwise-update-timer 60
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the names of the security profile.
minutes Specifies the interval in minutes. Valid values are between 10 and 1440. The
default value is 10 minutes.
To Next Page
Loading...
Need help?
General
