show mpls health-check vplsping
ExtremeWare Software 7.3.0 Command Reference Guide 1831
show mpls health-check vplsping
show mpls health-check vplsping {detail | <vpls_name> {peer <ipaddress> |
mac-address <macaddress>}} {detail}
Description
Displays the configuration and status for VPLS health-checks.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the configuration and status for VPLS health-checks. If no optional keywords
are specified, information is displayed in tabular format for all configured VPLS health-checks.
Optionally, if the
vpls_name
parameter is specified, only the health-checks associated with the specified
vpls are displayed. Health-check information displayed includes the type of health-check, current status,
and relevant configuration parameters. If the optional
detail
keyword is specified, the health-check
information is displayed in a comprehensive detail format. The detail format includes total state
transition count from up to down and down to up, time of last failure, total up time, and total down
time, and error code (if applicable). The
optional
peer and
mac-address
keywords may be specified to
further restrict the vplsping information displayed for the vpls_name. Information displayed for a
specific ipaddress or macaddress is always displayed in the detailed format.
Example
Needed
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Displays only health-checks associated with the specified vpls.
detail Displays the health-check information in comprehensive detail format.
ipaddress Restricts the vplsping information as specified.
macaddress Restricts the vplsping information as specified.
To Next Page
Loading...
Need help?
General
