Extreme Networks ExtremeWare - Configure Flowstats Export Delete Port

configure flowstats export delete port
ExtremeWare Software 7.3.0 Command Reference Guide 613
configure flowstats export delete port
configure flowstats export <group#> delete [<ipaddress> | <hostname>]
<udp_port>
Description
Removes a flow-collector device from an export group to which NetFlow datagrams are exported.
Syntax Description
Default
N/A.
Usage Guidelines
See Chapter 22 for information on a similar command for the PoS module (BlackDiamond switch only).
Example
The following command removes the flow-collector device with IP address 10.205.30.15 using UDP port
2025 from export group 5 on this switch:
configure flowstats export 5 delete 10.205.30.15 2025
History
This command first available in ExtremeWare 6.2 for “i” series platforms.
Platform Availability
This command is available on all platforms.
group# Specifies the export group to which the specified flow-collector device belongs.
The group number is an integer in the range of 1-32.
ipaddress Specifies the IP address of the flow-collector destination.
hostname Specifies the host name of the flow-collector destination.
udp_port Specifies a UDP port of the destination flow-collector.