show protocol
ExtremeWare Software 7.3.0 Command Reference Guide 347
show protocol
show protocol {<protocol>}
Description
Displays protocol filter definitions.
Syntax Description
Default
Displays all protocol filters.
Usage Guidelines
Displays the defined protocol filter(s) with the types and values of its component protocols.
Example
The following is an example of the
show protocol
command:
Protocol Name Type Value
---------------- ----- ------
IP etype 0x0800
etype 0x0806
ipx etype 0x8137
netbios llc 0xf0f0
llc 0xf0f1
decnet etype 0x6003
etype 0x6004
appletalk snap 0x809b
snap 0x80f3
ipx_8022 llc 0xe0e0
ipx_snap snap 0x8137
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on all platforms.
protocol Specifies a protocol filter name.
To Next Page
Loading...