746 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
unconfigure flowstats filter ports
unconfigure flowstats filter <filter#> ports <portlist>
Description
Removes the filter specification for the specified ports.
Syntax Description
Default
N/A.
Usage Guidelines
By unconfiguring the filter specification, this effectively disables this filter on all ports for which it was
configured.
Example
The following command resets the values for filter 4 on slot 1, port s 2 and 3:
unconfigure flowstats filter 4 ports 1:2-1:3
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
filter# Specifies the filter specification that should be removed.
portlist Specifies a set of ports or slots and ports from which the filter specification is
removed. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8
To Next Page
Loading...