2032 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
configure wireless ports interface security-profile
configure wireless ports <portlist> interface [1 | 2] security-profile
<name>
Description
Attaches a port or ports and interface to a security profile.
Syntax Description
Default
Unsecure.
Usage Guidelines
Each wireless port on the Alpine 3800 contains two interfaces. Interface 1 supports 802.11a, and interface
2 supports 802.11b/g radio signals. The
configure wireless port interface
command allows you
to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the security profile secure-wep to interface 1 on port 1:7:
configure wireless port 1:7 interface 1 security-profile secure-wep
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
name Specifies the name of the profile.
To Next Page
Loading...
Need help?
General
