clear wireless ports interface client-scan counters
ExtremeWare Software 7.3.0 Command Reference Guide 1993
clear wireless ports interface client-scan counters
clear wireless ports [<portlist> | all] interface [1 | 2] client-scan
counters [<hexoctet> | all]
Description
Clears the statistics associated with a particular client or with all clients.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to clear client scan counters on any interface: 1 or 2.
Examples
The following example clears port 15 and interface 1 of all client-scan statistics:
clear wireless ports 15 interface 1 client-scan counters all
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
hexoctet Specifies to use the hexadecimal value to identify a particular entry in the
client scan information table.
all Specifies all entries in the client scan information table.
To Next Page
Loading...
Need help?
General
