Extreme Networks ExtremeWare User Manual

configure log filter events match
ExtremeWare Software 7.3.0 Command Reference Guide 623
configure log filter events match
configure log filter <filter name> [add | delete] {exclude} events [<event
condition> | [all | <event component>] {severity <severity> {only}}] [match
| strict-match] <type> <value> {and <type> <value> ...}
Description
Configures a log filter by adding or deleting a specified set of events and specific set of match
parameter values.
Syntax Description
Default
If the exclude keyword is not used, the events will be included by the filter. If severity is not
specified, then the filter will use the component default severity threshold (see the note on
on page 621
when delete or exclude is specified).
Usage Guidelines
This command controls the incidents that pass a filter by adding, or deleting, a specified set of events
that match a list of <type> <value> pairs. This command is an extension of the command
configure
log filter events , and adds the ability to filter incidents based on matching specified event
parameter values to the event.
See the configure log filter events command on page 620 for more information on specifying and
using filters, on event conditions and components, on the details of the filtering process. The discussion
here is about the concepts of matching <type> <value> pairs to more narrowly define filters.
Types and Values. Each event in ExtremeWare is defined with a message format and zero or more
parameter types. The
show log events detail command on page 726 can be used to display event
filter name Specifies the filter to configure.
add Add the specified events to the filter
delete Remove the specified events from the filter
exclude Events matching the filter will be excluded
event condition Specifies the event condition.
all Specifies all events.
event component Specifies all the events associated with a particular component.
severity Specifies the minimum severity level of events (if the keyword only is omitted).
only Specifies only events of the specified severity level.
match Specifies events whose parameter values match the <type> <value> pair.
strict-match Specifies events whose parameter values match the <type> <value> pair, and
possess all the parameters specified.
type Specifies the type of parameter to match
value Specifies the value of the parameter to match
and Specifies additional <type> <value> pairs that must be matched

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English