Extreme Networks ExtremeWare User Manual

clear isis adjacency
ExtremeWare Software 7.3.0 Command Reference Guide 1259
clear isis adjacency
clear isis adjacency {level-1 | level-2 | level-1-2 | point-to-point}
{vlan <vlan name>}
Description
Clear the IS-IS adjacencies currently present.
Syntax Description
Default
N/A.
Usage Guidelines
The command clears IS-IS adjacencies. If no parameters are specified, all adjacencies, for all VLANs, are
cleared
Example
The following command clears the level 1 adjacencies for VLAN v1:
clear isis adjacency level 1 vlan v1
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
level-1 Specifies IS-IS level 1 adjacencies.
level-2 Specifies IS-IS level 2 adjacencies.
level-1-2 Specifies IS-IS level 1 and level 2 adjacencies.
point-to-point Specifies IS-IS point-to-point adjacencies.
vlan name Specifies the name of a VLAN.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English