Extreme Networks ExtremeWare - Reset Wireless Ports Interface

reset wireless ports interface
ExtremeWare Software 7.3.0 Command Reference Guide 2063
reset wireless ports interface
reset wireless ports <portlist> interface [1 | 2]
Description
Forces the wireless port interface to reset.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to return a port interface the default values. Default values are:
• Channel—auto
• Power level—full
• Transmit rate—54 Mbps
Example
The following example resets all of interface 1 ports to the default values:
reset wireless ports interface 1
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.