unconfigure eaps shared-port link-id
ExtremeWare Software 7.3.0 Command Reference Guide 999
unconfigure eaps shared-port link-id
unconfigure eaps shared-port <port> link-id
Description
Unconfigures an EAPS link ID on a shared port on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command unconfigures the link ID on shared port 1:1.
unconfigure eaps shared-port 1:1 link-id
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on the “i” series platforms.
port Specifies the port number of the Common Link port.
To Next Page
Loading...