1178 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure udp-profile delete
configure udp-profile <profile_name> delete <udp_port> [vlan <vlan name> |
ip address <dest_ipaddress>]
Description
Deletes a forwarding entry from the specified UDP-profile.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command removes port 34 from UDP profile port_34_to_server:
configure udp-profile port_34_to_server delete 34 ip address 10.1.1.1
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
profile_name Specifies a UDP profile name.
udp_port Specifies a UDP port number.
vlan name Specifies a VLAN name.
dest_ipaddress Specifies an IP address.
To Next Page
Loading...